I've lived in this house since 1990, 35 years now. As you might be aware the roof leaked and I had to replace it and the rain gutters. After they were done I decided that a fresh coat of paint was the next project.
First I needed a colour. When we bought the place it was barn red and our previous place was also barn red. I wasn't enamored of it but raising the family came first. Then that fell apart and everyone moved out but me. It wasn't until somewhere around 2007 I painted it olive drab with a dark brown trim, well I never quite finished all the trim. So basically green and brown.
This time I wanted to kinda take some colour from Nature and decided on this local plant called Coyote Mint, it has an interesting aroma when the leaves are crushed and can be brewed into a tea.
I plucked a branch and went to the local paint place and had them match it. I wanted the blossom for the trim and the leaves for the walls. They mixed me up a couple of samples and I tried them out on a corner of the house.
Most of my neighbors thought it would be nice! Next I had to look for a paint sprayer, Nobody in the neighborhood had an airless so I spent some time looking at rentals and searching craigslist for a deal. I finally decided to buy one. I got a Graco M5 and a 12' wand. Not money I wanted to spend, I felt it was the best way to go. When it came in I built a stand for it because I wanted the hose to go to the bottom of a 5 gal bucket.
Whilst looking I bought the trim paint and painted all the trim. It was at this time I realized that NOW would be the time to fix all those nagging things about the exterior which I disliked. Things like the peak of one end had no battens covering the gaps between the boards and those 2 gaping empty knotholes in the other end.
My first attempt to fill the knotholes was with paintable silicon. You can see it in the above picture, the white stuff. It was too slow curing and too flexible so it was removed forcibly. In its place I let in pieces of extra batten I had. The seams were wood puttied and sanded.
After paint I can't hardly see them.
There was A LOT of trips up and down the ladder to measure and cut and install each batten. I also made one for next to the front door and kitchen window which were never there. I made another trip to the paint store for the 5 gallons of paint.
Next was to tape off all the trim which was painted. Using blue tape and 8" paper roll it took a day to get this all done.
And then it rained, more of a drizzle, but too wet to paint. So I waited while the paint sat in my garage. For 2 days it drizzled and on day 3 I let it dry up.
Day 4 I hit the ground running! Set up extension cords, ladders, mixed the paint up, set up the sprayer with the extension wand and followed the instructions for priming.
Again with the ladder, up, down, move repeat. It took around 2 hours for the first coat and I did get a couple of runs, but........
After a 20 minute break I put on the second coat, This time without the wand extension. I confess it was a mistake to use it. I thought I could get under the eaves easier, which it did, but there wasn't proper room for it elsewhere. Again about 2 hours. Later I pulled off all the paper and tape.
The next day I started putting things back up like the house numbers and some trim pieces. I sanded off the overspray next to the house on the front porch with my palm sander. I re-hung my string lights only this time I recessed them behind the fascia.
Next up was to finish sanding the porch and staining it. Again I started with my palm sander and after an hour I could see it was going to take days. So I borrowed my neighbors belt and oscillating sanders. The belt sander was doing good and then I broke 3 belts in 10 minutes and switched to the oscillating, I think it is an 8" disc. I has 2 settings mild and MONSTER! I started on mild it wasn't much faster than my palm sander. So I tried MONSTER! I could barely hang on to it with a virgin disc! I finally figured out how to work it and over the next 3 hours got my ass really tired and the deck sanded. I was sore for some time from this.
Again rain was in the forecast so the next day I went to the hardware store and picked up a gallon of Penofin, transparent redwood stain. And not wanting to deal with overspray I brushed on 2 light coats with a wipe down in between.
After the front was done I turned my attention to the back porch. I had gotten overspray on the rafter for the roof. I wanted it to look pretty too. But first I wanted to seal the underside of the rear gutter to the porch's corrugated roof. It has been an annoying issue since I put on the roof as duff from the redwoods goes under the gutter and when I sweep or blow off the roof it falls down onto the porch and with all my crap it's hard to sweep it. The blower is especially dirty.
I had a partly used can of expanda foam and I climbed on the roof to put it in. Damn thing would work! Nada came out...grrrrr! Back to the hardware store and get another can. Supposed to fill 3" gaps. Well, I did get a bead down the 25' the last of it barely expanded.
Not nearly the seal I wanted, but I needed to get sanding.
Put on my safety gear
I used my tired ol arms and my palm sander and a whole pack of 80 grit pads and 3 hours to get it done. I rehung my antlers and extension cords. Went in to take a well deserved break.
Yet that gap kept bugging me. Sooooo back to the hardware store, pick up another can and try to fill the gap. I did fill most of the gap there is still about 5' I need to do, another can......
Then after a day of soaking in of the stain it rained, 1-9/16". And as a bonus the roof on the rear porch used to leak right in front of the slider where a tree branch hit and bent things, now it doesn't! Win!
The front beaded up nicely and is not slippery when wet. Another Win!
I am glad that job is done!